In general, stone carving machines use stepper motors, which are characterized by pauses and noise at each step. At a certain frequency, the stone carving machine will also produce body resonance and emit significant noise. This kind of noise will not affect the normal use of the machine. So, what kind of noise is harmful to stone carving machines?
There is abnormal noise when the spindle motor is running.
The abnormal noise emitted by the spindle motor of the stone carving machine during operation indicates that there is a quality problem with the spindle bearing, or that the spindle bearing has reached its service life, or that the quality has deteriorated or been damaged after wear. In this case, replacement can be considered.
There is a strange noise when walking axially.
There are phenomena such as stone carving machines on the X-axis. Most axial motor bearings are damaged or the X-axis guide rails lack lubricating oil, are too dirty, too tight, have worn ball bearings, or have dropped ball bearings. Such problems must be dealt with in a timely manner.
As a CNC tool, stone carving machines can easily achieve precise digital positioning, run smoothly, and have more than ten times higher accuracy than traditional equipment, especially when displaying gravity stone curves. The strength of the equipment greatly facilitates operation and is favored by everyone.