In the process of stone processing, cutting is an important process that determines the overall texture and cutting appearance of the stone after the initial processing. So, a good stone cutter is particularly important. The Hesheng new high-efficiency and energy-saving stone cutting machine is a modification of the hydraulic locking column stone cutting machine, combining the advantages of multiple models to make it more energy-efficient, efficient, and easy to operate. And machinery always has operational requirements, otherwise the stone cutter is prone to malfunction due to other factors and cannot be used normally. So, what aspects should we pay attention to when using a stone cutter?
1. Check the power voltage and water supply system of the stone cutter.
2. Place the specimen on the stone cutting machine workbench and secure it with a fixture.
3. Close the boxes of the stone cutter and turn on the water supply system.
4. Connect the power of the stone cutter and turn on the power switch. Adjust the operating speed of the stone cutter tool according to the hardness of the specimen.
5. Turn on the switch and start working until the sawing machine completes its travel and returns to the starting point.
6. Turn off the stone cutter and the water supply system to remove the specimen.
7. If abnormal noise is found in the main machine during normal cutting process, the tool should be immediately returned and stopped for inspection; You cannot press the fast forward button, otherwise it will damage the blade and equipment; During the cutting process, it is necessary to check at all times whether there is sufficient cold water to prevent blade wear or jamming.
8. After use, the residual rock debris on the worktable of the stone cutter should be cleaned in a timely manner, the water stains on the blades and worktable should be wiped clean, and lubricating oil should be added to the feed drag plate and guide rail.